 |
ISMS™
is an Authorized Distributor for R.L. Spellman Spellmaco
Adapter Bushings, Precision Transfer Punches, Blind-Hole Spotters, and
Many Other Precision Crafted Products Made in the USA.
|
 |
|
Tooling,
Workholding, Tool Holders & Accessories for Automatic Screw Machines
& CNC Turning & Milling; Davenport® Parts, Attachments, Machines
& Services
|
|
  
www.rlspellmanmfg.com
SPELLMACO
 PROUDLY
MADE IN THE USA
|
|
|
SPELLMACO
ADAPTER BUSHING SETS -
SPLIT/TYPE ADAPTER BUSHINGS
www.rlspellmanmfg.com/index_bushings.html
Bushings
are made out of the finest alloy steel and heat-treated and tempered to RC
61-64. Bushings with thin walls are heat-treated to RC 50-55. Bushings are
.002 undersize to facilitate use with a tolerance of plus .0005 minus 0.
Bushings are concentric within .0015 TIR.
|
|
|
Induction hardened and
tempered to RC 61-63 approximately 1-1/2" from point. Punches are
undersized as follows: 1 m/m to #40 - .002 undersize, 2.5 m/m to
17/32" - .0025 undersize, 35/64" to 2" - .003 undersize.
Tolerance plus or minus .0005.
[ SINGLE SIZES AVAILABLE UP TO 2" ]
- Set
no. 3-17
28 precision-made punches - 4-7/8" long with indexed stand. Sizes
3/32" to 1/2" by 1/64". Plus handy 17/32" size.
Finest tool steel, carefully heat treated. Available individually.
- Set
No. 33
A 'super' 33-piece set, sizes 1/2" through 1" by 64ths. This
larger, complete set provides a total matched set of transfer punches
that satisfies most shop requirements. Heat treated and tempered.
Available individually.
- Set
No. 25
Spellmaco metric size transfer punch set No. 25 is for the machine
shop tooling up for metric. Set of 25 precision punches in the most
popular metric sizes 1.0 MM through 13.0 by .5 MM Available
individually.
- Set
No. 1-60
Spellmaco's 60 piece wire gauge transfer punch set, sizes 1 through
60. This precision, matched set gives your shop a complete set of wire
gauge sizes, packed in a handy index stand. Punches are 4-7/8"
long. Available individually.
- Set
No. A-Z
This 26-piece punch set features letter sizes A through Z. All punches
precision crafted of the finest tool steel. Heat treated and tempered
for years of machine shop service. Punches are 4-7/8" long with
rugged index stand. Available individually.
- Set
No. 25A Metric
Sizes 13 MM through 25 MM by .5 MM Available individually.
|
|
|
SPELLMACO BLIND-HOLE
"SPOTTERS"
www.rlspellmanmfg.com/index_blind.html
Fast
easy way to locate opposite centers - When
holes do not extend through material - (such as holes for dowel pins,
perforating punches, etc.) Spellmaco blind-hole spotters get the job done
simply. Correct size "spotter" can be used in threaded, drilled or
reamed holes. Packaged six of one size in plastic tube.
BLIND-HOLE
"SPOTTER" SETS
- Set #18
(shown left)
A complete 108 piece set of 18 popular sizes of blind-hole spotters
in a sturdy steel storage case. Six of each size packed in a plastic
tube. 1/8" through 21/32" by 32nds. Convenient storage rack
enables quick identification and use.
- Set #11
(not shown) features eleven sizes
This Spellmaco set contains 66 spotters, packed six of one size to a
tube, 11/16" through 1" by 32nds. Same sturdy carrying case as
above.
|
|